"BUILT TO LAST"
was the Emerson
logo, and last they
did. This original
Emerson model 27645
was manufactured
circa 1920 and is
still running strong
today - over 90
years later.
If SPECIAL and
CONFIDENCE are what
you are looking for
in an antique
electric fan
restoration, then
this is it. This is
truly top quality
work that you can
trust and it comes
with a 12 month
warranty on the
motor. I have fan
customers that have
been running their
restored Emerson
fans for over ten
years. |
They truly don't
build them like this
anymore. The
American made
Emerson electric fan
is probably the best
built electric fan
ever.
This Emerson model
27645 with its 9"
blade span, is the
little brother to
the larger Emerson
model 27646 with a
12" wing span. The
27645 is 14 1/2"
tall with a 10"
diameter cage.
This fan features 9"
inch span Parker
(unique to Emerson),
solid brass blades,
adjustable
oscillator, and 3
speeds.
|
The four, solid
brass "Parker"
blades have been
roll-formed and
matched to
improve air
flow. They are
then stroboscope
aligned and
dynamically
balanced to
provide very
smooth
operation.
Finally the
blades are
machine buffed
and clear
coated. These
precision blade
adjustments are
another special
step in this
restoration.
Beautiful brass
cage badge
features the
Parker
TWIN-BLADES
logo. This is
an especially
difficult badge
to restore and
they are seldom
seen in this
condition.
Black background
has been
restored,
embossed brass
polished, then
an overall clear
coat applied for
preservation.
|
SPECIAL
NOTE:
To
properly
treat
and
prevent
reoccurrence
of rust
and
corrosion
between
the
brass
blades
and the
steel
hub,
they are
disassembled
and
processed
separately.
After
refinishing,
they are
reassembled
using
special
solid
brass
rivets
and
special
tooling.
The
reassembled
blades
and hub
assembly
look and
perform
like it
just
came out
of the
factory.
This is
a
special
step in
the
restoration
that is
seldom
done by
other
restorers.
To do it
properly,
it is
expensive
and time
consuming. |
The motor cord
and the line
cord are
matching black,
cloth covered
cords made
especially for
antique
restorations.
These cords are
so much closer
to the
originals. The
plug is a
vintage style
plug that was
commonly used on
this fan.
All electrical
is thoroughly
inspected and
tested with
extended trial
runs
concentrating on
current draw and
temperatures.
Stator winding
is cleaned and
sealed with an
appropriate
product.
Speed control is
completely
rebuilt because
most of the time
the choke coil
winding
insulation is
rotting and
pealing off, and
the other parts
are corroded and
rusting. In
addition, a new
choke coil is
rewound to
updated
specifications
making it more
compatible with
today's higher
line voltages.
The fan now
operates more
like it was
originally
designed to. |
The base,
motor
housing, and
gear housing
are
constructed
of rugged
cast iron.
A sliding
switch at
the base
provides a
choice of
"off and
three
different
speeds".
Refinishing
involved
complete
disassembly,
stripping to
bare metal,
bead
blasting,
and then
coating with
the very
best paint
system
available.
The gun
applied
finish is
the same
weather
proof finish
used on
automobiles.
It consists
of a
catalyst
activated
epoxy
primer/sealer,
a catalyst
activated
urethane
primer/filler,
2 coats of
color
base-coat,
and 2 coats
of catalyst
activated
clear-coat.
And it is
stunning.
All of the
many
processes
used in this
restoration
are too
numerous to
mention in
this short
description.
I do all of
the work
myself. If
you have any
questions
about what
has been
done to this
fan, please
email.
You see my
fans from
every angle
and they
look
brilliant in
the images
because they
are
brilliant. |
Here we
have a
view of
the
oscillator
gear
housing,
oscillator
control
and
motor
positioning
controls.
Oscillation
can be
adjusted
from 0
degrees
to 90
degrees.
Powerful
4-pole
motor
smoothly
turns
these
large
blades
with
ease.
It runs
strong
and
smooth
while
only
using 35
watts on
the LOW
setting.
Very
nice
distinctive
speed
changes
at 1250
RPM on
LOW,
1450 RPM
on
MEDIUM,
and 1610
RPM on
HIGH.
The
patented
design
of this
Emerson
motor
was not
only the
best of
that
era, but
is
considered
the best
to
date.
The
rotor of
this
1920's
motor
actually
rides on
a shaft
that
acts as
the
bearing
and is
in a
constant
oil
bath. A
new
leather
seal has
been
installed
to
ensure
that
this oil
bath
chamber
does not
leak.
Oscillator
gear
housing
has been
packed
with
gear
lube and
is ready
for
another
lifetime
of
operation.
|
Beautiful
solid
brass
Emerson
motor
badge
provides
the
specs
for
this
model.
Badge
black
background
has
been
restored,
raised
brass
polished,
then
clear
coated
for
preservation.
Only
polished,
solid
brass
rivets
are
used
to
anchor
the
badge.
All
hardware
(screws,
etc)
has
been
refinished
to
original
by
bluing
(a
Parkerizing
process).
Those
original
blued
screws
replaced
with
brass
screws
will
be
packaged
and
included
to
give
the
new
owner
the
option
of
going
back
all
original. |
Genuine wool blend felt has been chosen for the bottom cover. Its rich, dark green color and smooth, thick texture is so much closer to the factory original. This felt is purchased directly from a U.S. manufacturer especially for the Emerson restorations.
For safe shipping, this fan will be packaged and shipped in two separate cartons. Some assembly will be required. Instructions and tools are included. Technical support via email or telephone will be available and is encouraged if there are any questions or doubts. Special motor lube is also included. |
This Emerson electric fan has been very carefully, meticulously, and painstakingly restored with total attention to detail and quality. The new owner will be proud to show it and will thoroughly enjoy using it.
I have been collecting and restoring electric fans for many years, and I stand behind my work 100%. Also, I am an active member of the "Antique Fan Collectors Association".
Fixed shipping cost of $35.00 is for FedEx Ground in the continental U.S. only. If FedEx Ground is not available in your area or another carrier is desired, please email for shipping costs. Packaging is done with new materials and cartons.
INTERNATIONAL BIDDERS are welcomed, but be aware that this fan motor operates on 110-120 VAC at 60 cycles. You WILL need special electrical adapters for use in your country. Please email before bidding for shipping costs and insurance limitations. |
|
|
This restored Emerson 27645 electric fan
comes with a written 12 month electrical
warranty on the motor and speed control.
Please email your questions. If you require
additional images, include your email
address with your request. |
These brass badges are the crowning touch to
this restoration. What detailed restoration
could be complete without this critical
step? |
|
|